Hardware description
Product Description#
- Connection to previous extender or MIVO Connect (Contains hazardous voltage)
- Connection to next extender (Contains hazardous voltage)
- Status indication LED
- Wireless MBUS status LED
- Wireless MBUS communication transmit LED
- Wireless MBUS communication receive LED
- Product information label
- Connection for Wireless MBUS Antenna (SMA)
- DIN rail fixing latch
Important Notes#
All information contained in this manual is based on the time of publication and in subject to change without prior notice. It’s always recommended to download the latest manual from www.mivo.se/doc.
EU Waste Electrical and Electronic Equipment (WEEE) Directive
This Symbol on the product indicates that this product should not be treated as household waste. Instead, it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. If the product is disposed correctly the recycling of materials will help to conserve natural resources. For more information about recycling this product, please contact your local city office, your household waste disposal service or the distributor where you purchased the product. Please also make sure to separate the packaging and dispose this in accordance with local guidelines.
Symbols#
The warning symbol is used to mark information that is of high importance for safe operation, to avoid damage to the product and/or risk of losing data.
The high voltage sign indicates a location or section where hazardous voltage might be present and extra precaution is necessary to avoid serious injury or death.
Safety Information#
Make sure to read and understand this manual before installing, operating, or servicing an installation containing a MIVO Connect. MIVO Technology AB assumes no liability for customer’s failure to comply with these precautions. Installation should be performed by a qualified electrician in accordance with local electrical standards.
This equipment design typically applies to commercial or industrial equipment expected to be installed in locations where only adults are normally present.
Description of LEDs#
Status indication LED
| Color | Description |
|---|---|
 Off |
Device not powered up |
 Solid Red |
Serious failure, please contact MIVO support. |
 Solid Green |
System operating successfully |
| Red / Green blink |
System is booting up |
Wireless MBUS Status LED
| Color | Description |
|---|---|
 Off |
Wireless MBUS Ok |
 Solid Red |
Serious failure, please contact MIVO support. |
Wireless MBUS Communication Transmit LED
| Color | Description |
|---|---|
 Off |
No communication |
 Green blink |
Communication on wireless MBUS, Transmit |
Wireless MBUS Communication Receive LED
| Color | Description |
|---|---|
 Off |
No communication |
 Green blink |
Communication on wireless MBUS, Receive |
Connections#
Connection to MIVO Connect
The Expansion port contains both hazardous voltage and communication. Always make sure the MIVO Connect system is disconnected from the power source before any expansions are connected or disconnected to or from the system. The included cables must not be extended or modified in any way.
The MIVO Connect system is equipped with an expansion port to expand the capabilities of the system with one or more external interfaces. The expansions are attached side by side and use the included cable to power and communicate with the expansions. A longer cable (60 cm) is available from the manufacturer to continue the system on another row in the cabinet.
Wireless M-Bus#
The MIVO Wireless MBUS Extender is designed to collect wireless sensor information from sensors and meters. The extender is equipped with a high-performance radio receiver that includes both filters to block 4/5G disturbance and a low-noise amplifier to achieve long range and reliable communication.
The extender uses an external antenna connector for optimal antenna placement. The antenna should be manufactured for the 868 MHz band and suitable for the designated mounting location. The antenna is connected to the Wireless MBUS Extender using an SMA male connector.